Electric Guitar by DarrenN2 (published at Raise3D forum)
Printer: Raise3D N2
Model from: http://www.thingiverse.com/thing:710561
Filament used was a Wood filament from Filaments.ca in Canada
Settings: 0.27mm layer height and 30% infill. Print temp of 205℃ and bed temp of 60℃
Total of 12 printed parts
Total print time of approximately 88 hours
The print quality is superior so it needs minimum surface finish.
![3D Printed Musical Instrument--Classic Guitar](http://3dfilaments.ca/cdn/shop/articles/Classic_Guitar-5_large_9d291336-4364-45f4-a1a4-d8b6b505ada0.png?v=1476806950&width=1100)